How to Quote a Weld-Up Carport, Step by Step
GSQ helps contractors estimate welded steel carports built with square tubing and C purlins. This guide focuses on that construction method.
A good carport quote is more than a final number. It is a clear breakdown that protects your profit and gives the customer confidence. These are the steps many carport and metal cover contractors follow.
1. Start with measurements and roof type
Write down width, length and clearance height. Confirm whether the roof is single-slope or gable and where it will go: level ground, an existing slab or a site that needs grading.
A change in size almost always changes posts, beams, roofing and footings, so capture everything before you calculate.
2. Calculate materials for your weld-up carport
Separate the structure (posts, beams, purlins and bracing), the roofing (panels, trim and fasteners) and the foundation (concrete and anchoring).
Add consumables such as welding supplies, cutting discs and paint or primer, and plan your cuts to reduce waste. More detail in our carport material list guide.
3. Add labor, travel and permits
Estimate crew hours, material delivery and travel to the job. Check whether your city or county requires permits, plans or engineering; requirements vary by location and by wind and snow loads.
4. Add your profit and review before sending
Set your margin and a cushion for surprises. Because material prices change, put an expiration date on the quote.
5. Present a professional proposal
Include your logo, the customer details, the breakdown, payment terms and the estimated installation time. A 3D view helps customers understand what they are buying.
Common quoting mistakes
- Forgetting delivery or travel costs.
- Using outdated material prices.
- Not recording size changes after quoting.
- Leaving out an expiration date and deposit terms.
ILLUSTRATIVE EXAMPLE
Calculated GSQ example: a 20 × 20 ft carport
Example setup: 20 × 20 ft, 9 ft exposed post height, a 2:12 gable roof, 4 × 2 sections, double C-purlin rafters and 14 gauge steel. The footprint is 400 sq ft. The engine returns 4 posts and 2 rafter positions.
- Reference materials
- $1,012.43
- Example materials tax (8.25%)
- $83.53
- Example labor
- $300.00
- Example profit
- $200.00
- Illustrative total
- $1,595.96
USD amounts calculated from the GSQ workbook reference prices on October 31, 2026. These are not current supplier-confirmed prices or an offer. Review delivery, foundations, anchors, consumables and other applicable items separately; the labor and profit amounts are assumptions used to explain the workflow.
All guides ↗