Metal Carport Material List: A 20 × 20 ft Example
GSQ helps contractors estimate welded steel carports built with square tubing and C purlins. This metal carport material guide follows that construction method, from framing and roofing quantities to a purchasing list for your estimate.
A complete material list prevents last-minute trips to the store and quotes that come up short. Use this as a starting point for each project; exact parts depend on your building method and local requirements.
Welded framing: square tubing and C purlins
Posts, main beams, purlins, bracing and base plates. Confirm lengths and gauges with your supplier and the design you use.
Roofing
Roof panels, ridge cap and trim, fasteners with washers and, if the customer asks for them, gutters and downspouts.
Foundation and anchoring
Concrete, rebar or anchors and the footings your soil and local code call for. If the carport goes on an existing slab, check that it can carry the load and the anchoring.
Consumables
Welding supplies, cutting and grinding discs, primer or paint and any finishing products. They are small items, but they add up.
Cuts and waste
Plan your cuts to use each piece fully and round purchases to whole pieces. That reduces leftovers and shows what you really need to buy.
Before you buy, check
- Current supplier prices and availability.
- Standard lengths for each piece.
- That the list matches the customer’s final measurements.
- That delivery and consumables are in the cost.
ILLUSTRATIVE EXAMPLE
Calculated GSQ example: a 20 × 20 ft carport
Example setup: 20 × 20 ft, 9 ft exposed post height, a 2:12 gable roof, 4 × 2 sections, double C-purlin rafters and 14 gauge steel. The footprint is 400 sq ft. The engine returns 4 posts and 2 rafter positions.
| Material | Purchase quantity | Stock / sheet cut length |
|---|---|---|
| 4 × 4 square-tube posts, 14 gauge | 2 | 24 ft |
| Rafters, double 4 × 2 C purlins, 14 gauge | 4 | 20 ft |
| 4 × 2 roof purlins, 14 gauge | 6 | 20 ft |
| 4 × 2 horizontal beams, 14 gauge | 2 | 20 ft |
| Galvalume R-Panel sheets | 14 | 10'-5" |
| Galvalume ridge caps | 2 | 10 ft |
| Self-drilling screws | 126 | pieces |
| Stitch screws | 40 | pieces |
Two 24 ft square-tube stock pieces are budgeted for four 11 ft posts: 9 ft exposed plus a 2 ft commercial reference allowance. That allowance does not specify or validate a foundation. Distinguish purchased stock from installed members, and confirm cuts, joints and offcuts before fabrication.
All guides ↗